About Us  |   Contact Us
Home   »   Produk   »   Product & Service   »   3D Movement

Our Solution By

 
Banner Customer Service
 
Banner_Presentasi_Testindo
X- Banner Pameran  Plastic & Rubber
1 2

3DEMON ROBOTIC LASER ROBOVEC

 

The ROBOVEC unit has been designed for (semi-)permanent installation in any structure or geotechnical situation that requires continuous monitoring of the 3D position of significant points. The ROBOVEC allows to measure distance, horizontal and vertical angles for an unidentified number of points. The main features of ROBOVEC are flexibility in the choice of the number of monitored points, easy configuration and scheduling of the measurement campaigns, Ethernet integration. This instrument can be mounted vertically, horizontally or even upside down on the ceiling.

 

The ROBOVEC unit is based on a laser distance meter and a bi-axial modular robotization for horizontal and vertical movement. The instrument is able to measure the variation of the distance and then horizontal and vertical angles between the instrument t zero, assumed to be fix, and the monitored points. Additional parameters that can be measured by the instrument are the temperature and the reflected signal strength. During a measurement campaign, the ROBOVEC can perform an autocentering algorithm on selected targets in order to find the new target’s centre if this has moved between two following measurements. The measurements are automatically stored on the PC for further analysis. The ROBOVEC system is fully compatible with other SMARTEC products. The measurements can be automatically and dynamically imported in a standard SDB database and can be integrated with measurements from other sensors (e.g. static SOFO, ADAM, DiTeSt, 3DeMoN-GPS …). The user can therefore view and analyze all its data with a single software interface.

 

Kami sangat menyarankan anda untuk menggunakan data loggeratau data acquisition agar pemantauan menjadi lebih efisien dan cepat.


Feature

  1. Automatic and remote operation
  2. High resolution and precision
  3. Long range distance measurements
  4. Distance accuracy up to 0.2 mm
  5. Angle measurements resolution 0.0013°
  6. Temperature measurements
  7. TCP/IP connectivityCompatible with SDB software

Spesification

  1. AC Power supply 110/220 VAC
  2. External connections Ethernet cable to PC (cross-over cable for direct connection, normal cable for HUB/Switch connection)
  3. Dimensions ~300 mm x 300 mm x 400 mm
  4. Laser Laser class II (<0.95mW)
  5. Weight ~16 kg
  6. Operating temperature -10°C to 50°C